EUTECH INSTRUMENTS CADMIUM EPOXY Instrukcja Obsługi Pobierz pdf (Strona 56)

...setting the standard again and again

MultiParameter ▼ Handheld Meters

Right: pH/CON 300 meter with

pH electrode (included).

Far right top: Waterproof,

IP67-rated housing floats!

Far right bottom: pH/CON 300

meter kit

pH/CON 300 Meter

A waterproof meter that does it all—measures

pH, conductivity, TDS, and temperature!

Specifications

Mode pH Conductivity TDS Temperature

Range

–2.00 to

16.00 pH

0 to 19.99 μS,

0.00 to 9.99 ppm,

0.0 to 100.0°C;

32.0 to 212.0°F

0 to 199.9 μS, 10.0 to 99.9 ppm,

0 to 1999 μS, 100 to 999 ppm,

0 to 19.99 mS, 1.00 to 9.99 ppt,

0 to 199.9 mS

10.0 to 99.9 ppt, 100 to 200 ppt

Resolution

0.01 pH

0.01 μS, 0.1 μS, 1 μS,

0.01 mS, 0.1 mS

0.01, 0.1, 1 ppm,

0.01, 0.1, 1 ppt

0.1°C;

0.1°F

Accuracy

±0.01 pH ±1% full-scale ±1% full-scale ±0.5°C; ±0.5°F

Calibration

Up to five points

(1.68, 4.01, 7.00,

10.00, 12.45)

Up to five points

(one per range)

Up to five points

(one per range)

Offset 0.1°

increments

Ordering Information

Cat. no. Description Included

WD-35631-00

pH/CON 300 meter

Meter, pH electrode 35641-51, combination conductivity/TDS/

temperature probe 35608-50, and batteries

WD-35631-60

pH/CON 300

meter kit

Meter

, pH electrode 35641-51, combination conductivity/TDS/

temperature probe 35608-50, calibration solution pouches (three each

of pH 4.01, 7.00, 10.00, and rinse water; and one each of 447 μS, 1413

μS, 2764 μS, 15,000 μS, and rinse water), one rinse bottle, three sample

bottles, batteries, and hard carrying case.

Probes

WD-35641-51 Replacement pH electrode, double-junction, sealed, polygel fill, 3-ft cable

WD-35608-50 Replacement combination conductivity/TDS/temperature probe, K = 1.0, 3-ft cable

WD-35618-05 Temperature probe. Provides ATC for pH when used with pH electrodes without ATC.

Waterproof and dustproof

with IP67 rating—it FLOATS!

Toggle between pH, conductivity,

and TDS readings

Dual display shows measured

parameter plus temperature (°C/°F)

▼

Read two parameters at a glance

Advanced setup mode

▼

Recalls previous calibration points,

pH electrode slope and offset,

conductivity/TDS effective cell

constants per range, and more

Easy push-button calibration

▼

Five-point calibration for pH and

either conductivity or TDS;

temperature offset calibration

pH auto buffer recognition

▼

Fast, easy pH calibration

Auto ranging for conductivity

and TDS measurements

▼

Fast response and best resolution

over a wide range

Selectable manual or automatic

temperature compensation (ATC)

▼

The highest accuracy in any

situation

Selectable automatic endpoint

▼

Automatically freezes reading

when stable for five seconds

Separate pH and conductivity/

TDS probes

▼

Lets you use specialty probes

for different applications

Hold function, Ready

indicator, Automatic shutoff

meter only

Temperature compensation: automatic or manual

(selectable) from 0 to 100°C (32 to 122°F)

Operating temperature: 0 to 50°C (32 to 122°F)

Temperature coefficient: adjustable from 0.0 to 10.0%

per °C or °F

Conductivity-to-TDS factor: adjustable from 0.4 to 1

Normalization temperature: adjustable from

15 to 30°C (59 to 86°F)

Power: four 1.5 V AAA batteries (included),

>200 hours continuous use

Dimensions

Meter: 7.5"L x 3.5"W x 1.75"H (19 x 9 x 4.5 cm)

Boxed: 9.2"L x 9.2"W x 2.75"H (23 x 23 x 7 cm)

Weight

Meter: 1.0 lb (0.45 kg); Boxed: 2.0 lb (0.9 kg)

http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag

EUTECH INSTRUMENTS CADMIUM EPOXY Instrukcja Obsługi Strona 56

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola EUTECH INSTRUMENTS CADMIUM EPOXY