EUTECH INSTRUMENTS CADMIUM EPOXY Instrukcja Obsługi Strona 55

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 68
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 54
...setting the standard again and again
®
53
Handheld Meters Multiparameter
Toggle between pH/°C and
conductivity/°C readings with
one button press
For the convenience of three meters
in one!
Includes multi-sensor submersible
probe with 10-ft submersible cable
There’s no need to switch probes
when you switch measurement
modes!
Optional ground water down-well
probes available
1.7" diameter probe fits into
a 2" well head
Dual display shows measured
parameter plus °C simultaneously
Mode annunciators clearly indicate
status of readings
Easy push-button pH and
conductivity calibration
Calibrate pH at up to three points
and conductivity at up to four points
for high accuracy over the entire
measuring range
Auto-buffer recognition for
pH calibration
Auto ranging for conductivity
measurements
For fast response over a wide range
Automatic temperature
compensation (ATC)
Keeps your measurements accurate
even in solutions with varying
temperatures
Hold, Ready indicator, Automatic
shutoff functions
Meter kit available
Contains everything you need
for calibration and measurement
packaged in a hard carrying case
pH/CON 10 Meter
Measure pH, conductivity, and temperature
with just one meter and probe!
Mode pH Conductivity Temperature
Range
0.00 to 14.00 pH
0 to 19.99 μS, 0 to 199.9 μS,
0 to 1999 μS, 0 to 19.99 mS
0.0 to 100.0°C
Resolution
0.01 pH 0.01 μS, 0.1 μS, 1 μS, 0.01 mS 0.1°C
Accuracy
±0.01 pH ±1% full scale or ±1 digit ±0.5°C
Calibration
Up to three points
(pH 4.01, 7.00, 10.00)
Up to four points
(one point per range)
Offset in 0.1°C increments
T
emperature compensation: automatic from 0 to 50°C
Operating temp: 0 to 50°C
Conductivity cell constant (K): fixed at 1.0
Temperature coefficient: fixed at 2.00% per °C
Power: four 1.5 V AAA batteries (included), >50 hours
continuous use
Dimensions
Meter: 7.5"L x 3.75"W x 2.25"H (19 x 9.5 x 5.7 cm)
Boxed: 9.2"L x 9.2"W x 2.75"H (23 x 23 x 7 cm)
Probe: 6.8"L x 1.3" dia (173 mm L x 33 mm dia) with
10-ft (3-m) cable
Weight
Meter: 1.0 lb (0.45 kg); Boxed: 2.0 lb (0.9 kg)
Ordering Information
Catalog number Description Included
WD-35630-03
pH/CON 10 meter only Meter and batteries
WD-35630-02
pH/CON 10 meter Meter, pH/conductivity/°C probe 35630-50, and batteries
WD-35630-62
pH/CON 10 meter kit
Meter, pH/conductivity/°C probe 35630-50, ”Singles” calibration solution
pouches (three each of pH 4.01, 7.00, 10.00; and two each of conductivity
447 μS, 1413 μS, 2764 μS, 15,000 μS), three rinse water pouches, sample
bottle, batteries, and hard carrying case
Specifications
Top: Down-well
probes fit easily into
2" well heads.
Bottom: pH/CON 10 kit
includes everything
you need for
calibration and
measurement.
Right: Waterproof
pH/CON 10 with
multi-sensor probe.
WD-35630-50 Replacement pH/conductivity/°C probe, 10-ft submersible cable
WD-09376-00 Replacement batteries, 1.5 V AAA. Pack of 12
WD-35630-69 Calibration kit includes ”Singles“ calibration solution pouches (three each of pH 4.01,
7.00, 10.01, rinse water; and two each of conductivity 447 μS, 1413 μS, 2764 μS, 15,000 μS), squeeze
bottle, and hard carrying case. (Meter not included)
Down-Well Probes
These pH/conductivity/temperature probes were specially engineered with a slim
design so you can use the pH/CON 10 meter to test ground water. Probes measure only
1.7" dia and easily fit into 2" well heads.
WD-35630-52 Down-well probe, pH/conductivity/temperature; 10-ft cable
WD-35630-54 Down-well probe, pH/conductivity/temperature; 25-ft cable
WD-35630-56 Down-well probe, pH/conductivity/temperature; 100-ft cable
meter only
http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682
Przeglądanie stron 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag