EUTECH INSTRUMENTS CYBERSCAN PH 300310 PORTABLE METER Instrukcja Obsługi Pobierz pdf (Strona 31)

From mV measurement mode

If you are in mV measurement mode, the display shows

the relative mV offset. You can adjust the relative mV

offset in relative mV calibration mode. See page 12 for

instructions.

1. If necessary, press the MODE key to select mV

measurement mode.

2. From mV measurement mode, press the SETUP key

to enter Set Up mode.

3. Press the MI/▲ or MR/▼ keys to scroll through

su/jointfilesconvert/333898/bgroups until you view parameter P3.0.

4. Press the ENTER key to select parameter 3.1.

5. The display shows the electrode offset value. It is

the relative mV offset. If you have not calibrated at

any mV standards, the primary display shows 0.00

mV.

6. Press the ENTER key to return to P3.0.

7. At any point, you can press the CAL/MEAS key to return to measurement mode.

See figure 27.

Figure 27 - View electrode offset value

from mV measurement mode

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Brak uwag

EUTECH INSTRUMENTS CYBERSCAN PH 300310 PORTABLE METER Instrukcja Obsługi Strona 31