EUTECH INSTRUMENTS CYBERSCAN PH 300310 PORTABLE METER Instrukcja Obsługi Pobierz pdf (Strona 17)

4 MEASUREMENT

This meter is capable of taking measurements with automatic or manual temperature compensation.

Automatic temperature compensation only occurs when a temperature sensor is plugged into the

meter. If there is no temperature sensor plugged into the meter, the default manual temperature

setting is automatically 25 °C. You can manually set the temperature to match your working

conditions using a separate thermometer.

4.1 Automatic Temperature Compensation

For automatic temperature compensation (ATC) simply plug

the temperature probe into the meter (see page 6 for

directions). The ATC indicator will light up on the LCD. See

figure 13.

NOTE: If you are using a temperature probe, the

probe must be submersed in the liquid you

are measuring.

Figure 13 - ATC annunciator will light

up when connected to temperature

probe

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Brak uwag

EUTECH INSTRUMENTS CYBERSCAN PH 300310 PORTABLE METER Instrukcja Obsługi Strona 17