EUTECH INSTRUMENTS ALPHA COND 500 - REV 4 Dokumentacja Pobierz pdf (Strona 13)

Transmitter Cond/Res 2-Channel M300 13

Printed in Switzerland 52 121 318

3.3.5 Navigation with ↑ in Display

If a ↑ is displayed on the bottom right hand corner of the display, you can use the  or the 

key to navigate to it. If you click [ENTER] you will navigate backwards through the menu

(go back one screen). This can be a very useful option to move back up the menu tree without

having to exit into the measuring mode and re-enter the menu.

3.3.6 “Save changes” dialog

Three options are possible for the “Save changes” dialog: Yes & Exit (Save changes and exit

to measuring mode), “Yes & ↑” (Save changes and go back one screen) and “No & Exit”

(Don’t save changes and exit to measuring mode). The “Yes & ↑” option is very useful if you

want to continue conﬁguring without having to re-enter the menu.

3.3.7 Security Passwords

The M300 transmitter allows a security lock-out of various menus. If the security lock-out feature

of the transmitter has been enabled, a security password must be entered to allow access to the

menu. See section 9.3 for more information.

3.4 Display

NOTE: In the event of an alarm or other error condition the M300 Transmitter will display a

ﬂashing in the upper right corner of the display. This symbol will remain until the condition

that caused it has been cleared.

NOTE: During calibrations, clean, Digital In with Analog Output/Relay/USB in Hold state,

a ﬂashing H will appear in the upper left corner of the display. This symbol will remain for

20 seconds until after the calibration or clean is completed .This symbol will also disappear

when Digital In is deactivated.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

Brak uwag

EUTECH INSTRUMENTS ALPHA COND 500 - REV 4 Dokumentacja Strona 13