EUTECH INSTRUMENTS ALPHA COND 500 - REV 4 Instrukcja Instalacji Pobierz pdf (Strona 9)

MN100003 REV A (12/07/10)

Page 9

VibraCheck II Quick Guide:

To begin:

1. Press and hold the on/ off button for 4 seconds. Press

the on/ off button again to illuminate the display.

2. Connect accelerometer and headphone or optional

thermometer if desired.

3. Select desired test you wish to make; Displacement,

Velocity or Acceleration.

4. You may also choose in addition other functions such as

hold. This “freezes” the display until the hold is pressed

again. Gain will increase the resolution by one decimal

place. Avg./ PK (peak) allows you to select either Average

or Peak. Selecting Average will slow the display by only

displaying average of the last 10 readings. Peak displays

only the highest peak value. BRG (bearing) is a high

pass ﬁ lter that ﬁ lters values below 500 Hz. This means

that you will not see anything on the display below 500

Hz bandwidth.*

Note: Hold, Gain, Avg/ Pk, and BRG are used with the

test mode selected: disp, vel, or accel.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Brak uwag

EUTECH INSTRUMENTS ALPHA COND 500 - REV 4 Instrukcja Instalacji Strona 9